Product Description

PYRAX Dual Cure Resin Cement is a light and chemically curing low viscosity radiopaque, two component polymer resin based composite adhesive for luting of composite and ceramic restoration.

Application

Permanent cementation of crown and bridge.

Permanent cementation of endodontic posts made of metal, reinforced composite.

Permanent cementation of implant retained crowns.

Composition

Base Paste : Bisphenol A Glycidyl Methacrylate, Ethoxlated Bisphenol A Dimethacrylate, Triethylene

Glycol Dimethacrylate, Silanated Barium Glass Powder, Amorphous Fumed Silica, Curing Agents and

Stabilizer.

Catalyst Paste : Bisphenol A Glycidyl Methacrylate, Ethoxlated Bisphenol A Dimethacrylate, Triethylene Glycol Dimethacrylate, Silanated Barium Glass Powder, Amorphous Fumed Silica, Curing Agent and Stabilizer.

Method of Use

Dispense the material from syringe through automix tip. The initial set will occur in 2:00 -2:30( min:sec) with a final set at 3-4 minutes. The cement may also be cured with a dental curing light with a 40 second exposure.

  1. Metal to Enamel/Dentin : Metal restorations to tooth structure-crowns, inlays, bridges, and posts including  Maryland and bridges) After try-in, sandblast each side of the restoration. Using a metal primer of your choice, treat the metal exposed to the paste. Clean tooth with non-fluoridated prophy paste or pumice. To prepare tooth for bonding, use a universal dentin / enamel bonding system. Mix equal amount of catalyst and base pastes and use a plastic instrument or injection system to place in restoration. Avoid trapping air bubbles. Seat Restoration on tooth and hold in place until paste reaches initial set (about 2:00- 2:30 minutes). Use a scaler or explorer to remove excess cement immediately upon initial set. It is not important to wait until the final set to remove excess cement.
  1. Metal to Metal : Implant prosthesis or crown on post. Sandblast all external metal surfaces to be exposed to paste. Rough intra-oral metal with a micro-etcher or bur. Using a metal primer of your choice, treat the metal exposed to the paste. Clean posts or abutments with non-fluoridated prophy paste or pumice. Mix equal amounts of catalyst and base pastes and use a plastic instrument or injection system to place in restoration. Avoid trapping air bubbles. Seat restoration on tooth and hold in place until paste reaches initial set (about 2:00–2:30 minutes). Use scaler or explorer to remove excess cement immediately upon initial set. It is not important to wait until final set to remove excess cement.
  2. Ceramic Restorations to Teeth (Porcelain Veneers, In-lays, On-lays): After try-in, etch ceramic restoration and place in acetone or ethanol in ultrasonic cleaner for 1-2 minutes. Place silanating agent on internal or porcelain restoration. Clear tooth with non-fluoridated prophy paste or pumice. To prepare tooth for bonding, use a universal dentin / enamel bonding system. Mix equal amounts of catalyst and base pastes and use a plastic instrument or injection system to place in Restoration. Avoid trapping air bubbles. Seat restoration on tooth and hold in place until paste reaches initial set (about 2:00-2:30 minute) use scaler or explorer to remove excess cement immediately upon initial set. It is not important to wait until final set to remove excess cement.

Storage

Store at room temperature between 5~ 35oC. Protect from direct sunlight. Close the container carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool & dry place.

Shelf life

2 years from date of manufacturing.

Presentation

1 x 11 gm Automix Syringe x 10 Automix Tips

Shade: A1, A2

" />
 

Pyrax Dental Mart

Pyrax Dental Mart was founded in 2015 with a vision to provide it's customers with wide range of world class Dental Products and Equipment's on a single platform. Matching pace with the ever changing technological advancement in the way we shop for almost everything with few clicks. PDM is supported with a vast 39 years of experience in dental industry under a well recognized brand name - PYRAX. After serving Dentist's & Laboratories all over India and World for around four decades, we felt it as our duty to reach our customers directly from the Manufacturing plant and make them partners in sharing benefits and happiness.

Why Choose Us?

Pyrax Dental Mart is a direct venture of the PYRAX Group to provide best products at amazing prices direct at your doorsteps. All the dental products on Pyrax Dental Mart are researched, manufactured, tested and packed within the CE & ISO:9000 certified facility of PYRAX Group to bring the best to you in it's original form. The un-compromised quality has been certified by Dentist's all over the world and has been able to compete with well known world brands in Dental Industry.

“Excellent Alginate, high precision & low shrinkage impressions”

Dr. Mona Kakar
Le Visage, Mumbai

“Romancing with PYRAX Type A Silicone Impression Material”

Dr. Mayank Vallabh
Vallabh's Dental Studio, Haridwar

“Kudos PYRAX for innovation & fine quality dental materials”

Dr. Abdallah Nassar, Jerusalem

Location

Operating Unit Address:

Salempur Industrial Area ROORKEE Uttarakhand - 247667 India

Business Hours:

Mon - Sat

10 a.m. - 7 p.m.

Sunday

Closed